FixVault
Home › Hyundai › 2018 › Elantra GT Base, Automatic Trans › Repair and Diagnosis › Body & Frame › Frames, Subframes & Crossmembers › Body Dimensions › General Information › Measurement Method › Measurement Point

Measurement Point

  1. Measurements should be taken at the hole center.
    G12644588Courtesy of HYUNDAI MOTOR AMERICA
    NOTE: You should measure the center of outer panel (hole).
    G12644589Courtesy of HYUNDAI MOTOR AMERICA
    G12644590Courtesy of HYUNDAI MOTOR AMERICA
About FixVault