FixVault
Home › Hyundai › 2018 › Elantra GT Base, Automatic Trans › Repair and Diagnosis › Electrical › Charging Systems › Charging System - 2.0L › Alternator › Repair Procedures › Disassembly

Repair Procedures: Disassembly

  1. Remove the rear cover (A) after removing nuts (B).
    G12646324Courtesy of HYUNDAI MOTOR AMERICA
  2. Remove the mounting bolts (A) and the regulator assembly (B).
    G12646325Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the slip ring guide (A) after pulling it.
    G12646326Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the pulley (A).
    G12646327Courtesy of HYUNDAI MOTOR AMERICA
  5. Unsolder the 3 stator leads (A).
    G12646328Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the 4 through bolts (A).
    G12646329Courtesy of HYUNDAI MOTOR AMERICA
  7. Disconnect the rotor (A) and housing (B).
    G12646330Courtesy of HYUNDAI MOTOR AMERICA
About FixVault