FixVault
Home › Hyundai › 2018 › Elantra GT Base, Standard Trans › Repair and Diagnosis › Body & Frame › Door Locks › Smart Key System › Smart Key Diagnostic › Repair Procedures › Inspection › Neutralization Status Check

Neutralization Status Check

  1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
  2. After IG ON, select the "Neutralization mode".
    G12645200Courtesy of HYUNDAI MOTOR AMERICA
    G12645201Courtesy of HYUNDAI MOTOR AMERICA
    G12645202Courtesy of HYUNDAI MOTOR AMERICA
    G12645203Courtesy of HYUNDAI MOTOR AMERICA
About FixVault