FixVault
Home › Hyundai › 2018 › Elantra Value Edition › Repair and Diagnosis › Engine Performance › Ignition System › Ignition System - 2.0L › Ignition Coil › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the engine cover.
  3. Disconnect the ignition coil connectors (A).
    Fig 1: Disconnecting Ignition Coil Connectors
    G12024736Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
      • Fig 2: Pulling Lock Pin And Pushing Clip
      G12024737Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the ignition coils (A).
    Fig 3: Removing Ignition Coils
    G12024738Courtesy of HYUNDAI MOTOR AMERICA
About FixVault