Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.

Install the BSD unit and bracket.
Tightening torque:

BSD bracket: 3.9 - 5.9 N.m (0.4 - 0.6 kg cm, 2.9 - 4.4 lb-ft)

BSD unit: 3.92 ± 0.98 N.m
Install the rear bumper.
Connect the negative (-) battery terminal.
NOTE:
- Take care not to confuse left side (master) and right side (slave) unit when installing.
- BSD units connector connect to the wiring connector.