FixVault
Home › Hyundai › 2018 › Ioniq Hybrid Blue › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (HEV) › Canister Close Valve (CCV) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the canister assembly.

    (Refer to Emission Control System - "CANISTER ")

  3. Disconnect the vapor hose (A).
    Fig 1: Disconnecting Vapor Hose
    G12111485Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the installation bolt (A), and then remove the canister close valve.
    Fig 2: Removing Canister Close Valve (1 Of 2)
    G12111486Courtesy of HYUNDAI MOTOR AMERICA
    Fig 3: Removing Canister Close Valve (2 Of 2)
    G12111487Courtesy of HYUNDAI MOTOR AMERICA
About FixVault