FixVault
Home › Hyundai › 2018 › Ioniq Plug-In Hybrid › Repair and Diagnosis › Electrical › Starter › Button Engine Start System (PHEV) › Start/Stop Button › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Remove the start/stop button (B) after disconnect the connector (A).
    G12732033Courtesy of HYUNDAI MOTOR AMERICA
About FixVault