FixVault
Home › Hyundai › 2018 › Ioniq Plug-In Hybrid › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (PHEV) › Heated Oxygen Sensor (HO2S) › Repair Procedures › Removal › [Bank 1/Sensor 2]

[Bank 1/Sensor 2]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the connector (A), and then remove the sensor (B).
    G12727161Courtesy of HYUNDAI MOTOR AMERICA
    G12727162Courtesy of HYUNDAI MOTOR AMERICA
About FixVault