FixVault
Home › Hyundai › 2018 › Ioniq Plug-In Hybrid › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel Delivery System (PHEV) › Accelerator Pedal › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the accelerator position sensor connector (A).
    G12727286Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the installation nut (A), and then remove the accelerator pedal module.
    G12727287Courtesy of HYUNDAI MOTOR AMERICA
About FixVault