FixVault
Home › Hyundai › 2018 › Santa Fe Sport Base, AWD › Repair and Diagnosis › Body & Frame › Windows › Power Windows › Power Window Switch › Repair Procedures › Removal › Rear Power Window Switch

Rear Power Window Switch

  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear door trim.

    (Refer to Body - "REAR DOOR TRIM ")

  3. Remove the power window switch assembly (A) after loosening the mounting screws (3 EA)
    Fig 1: Locating Power Window Switch Assembly With Mounting Screws
    G12054735Courtesy of HYUNDAI MOTOR AMERICA
  4. Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.
    Fig 2: Rear Power Window Switch Terminal Continuity Chart
    G12054736Courtesy of HYUNDAI MOTOR AMERICA
About FixVault