FixVault
Home › Hyundai › 2018 › Santa Fe XL Base › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Body Control Module › Body Control Module (BCM) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad center panel.

    (Refer to "CRASH PAD CENTER PANEL ")

  3. Disconnect the body control module connectors (A).
    G12035963Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the body control module (A) after loosening the nuts.
G12035964Courtesy of HYUNDAI MOTOR AMERICA
About FixVault