FixVault
Home › Hyundai › 2018 › Santa Fe XL Base › Repair and Diagnosis › External Pages › Different car › Section 31 (Engine Control System) › Accelerator Position Sensor (APS) › Repair Procedures › Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe XL and 2017 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the GDS on the Data Link Connector (DLC).
  2. Turn the ignition switch ON.
  3. Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.

    Specification  : Refer to "Specifications "

About FixVault