FixVault
Home › Hyundai › 2018 › Sonata Eco › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L (Except HEV) › Boost Pressure Sensor (BPS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the boost pressure sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor.
G12637523Courtesy of HYUNDAI MOTOR AMERICA
About FixVault