| DTC Strategy |
- Check HO2S Signal Amplitude
|
- Leak in intake or exhaust system.
- Poor connection or damaged harness
- HO2S contamination
|
| Enable Conditions |
- Upstream O2 sensor operative readiness is detected
- Sensor tip temperature is greater than 640°C (1184°F) or heater max heating or normal heating is more than 30sec.
- O2 sensor forced stimulation is activated
- P0420 (Catalyst Diagnosis) monitoring is activated
- P0133 diagnosis is synchronized with P0420
- Battery voltage is between 11V and 16V
|
| Threshold Value |
- Integral (Lambda signal amplitude measured/Lambda signal amplitude of a slow sensor) is higher than 1.0
|
| Diagnostic Time |
- 22 lambda controller cycle
|
| Mil On Condition |
|