FixVault
Home › Hyundai › 2018 › Sonata SE › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.4L (Except HEV) › Accelerator Position Sensor (APS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
    G12633329Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the mounting cap (A).
    G12633330Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the installation bolt (A), and then remove the accelerator pedal module.
    G12633331Courtesy of HYUNDAI MOTOR AMERICA
About FixVault