FixVault
Home › Hyundai › 2018 › Tucson Limited, 4WD › Repair and Diagnosis › Body & Frame › Ignition Switch/Steering Lock › Ignition Switch Assembly › Ignition Switch › Repair Procedures › Inspection

Repair Procedures: Inspection

  1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from the steering column.
    G12610165Courtesy of HYUNDAI MOTOR AMERICA
    G12610166Courtesy of HYUNDAI MOTOR AMERICA
  2. Check for continuity between the terminals.
  3. If continuity is not specified, replace the switch.
    G12610167Courtesy of HYUNDAI MOTOR AMERICA
About FixVault