FixVault
Home › Hyundai › 2018 › Tucson Sport, FWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.4L › Camshaft Position Sensor (CMPS) › Repair Procedures › Removal › [Bank 1/Intake]

[Bank 1/Intake]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal
  2. Disconnect the camshaft position sensor connector (A)
  3. Remove the installation bolt (B), and then remove the sensor.
    G12612752Courtesy of HYUNDAI MOTOR AMERICA
About FixVault