FixVault
Home › Hyundai › 2018 › Tucson Sport, FWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.4L › Intake Air Temperature Sensor (IATS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal
  2. Disconnect the manifold absolute pressure sensor connector (A)
  3. Remove the mounting bolt (B), and then remove the sensor from the intake manifold.
    G12612733Courtesy of HYUNDAI MOTOR AMERICA
About FixVault