FixVault
Home › Hyundai › 2018 › Tucson Value, 4WD › Repair and Diagnosis › External Pages › Different car › Section 88 (Power Lift Gate System) › Power Liftgate Module › Repair Procedures › Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power liftgate module.
  2. Connect the power liftgate module connector.
  3. Install the luggage side trim [LH].
  4. Connect the negative (-) battery terminal.
    NOTE:
    • Make sure that the unit connectors are plugged in properly.
    • Check the Power Liftgate system for normal operation.
About FixVault