| DTC Strategy |
- Valve relay malfunction monitoring (Solenoid valve coil open)
|
- Damaged or poor connector connection
- Faulty HECU
|
| Enable Conditions |
- Normal battery voltage
- Ignition switch is "ON"
|
| Threshold Value |
- If the Valve relay is switched "ON" and the corresponding solenoid driver OFF under the condition below.
- ABS valve: Voltage of solenoid is less than 2.0±0.2V for 0.06 sec.
- ESC valve: Voltage of solenoid is less than (0.33±0.03) *VVR) V for 0.06 sec.
|
| MIL |
- The EBD/ABS//ESP (ESC) warning lamps are activated.
|
| Reset condition |
- Turn ignition switch off and on.
|