FixVault
Home › Hyundai › 2019 › Elantra GT Base › Repair and Diagnosis › Brakes › Traction Control › Electronic Stability Control (ESC) System › ESC Control Unit › Repair Procedures › Installation

Repair Procedures: Installation

  1. To install, reverse the removal procedure.
  2. Tighten the HECU mounting bolts and nuts to the specified torque.
  3. After installation, bleed the Brake System.

    (Refer to ESC (Electronic Stability Program) System - "ESC SYSTEM BLEEDING ")

  4. Conduct the Variant Coding.
  5. Conduct the Auto Detected Sensor Calibration.
  6. Conduct the Longitudinal G Sensor Calibration.
About FixVault