Repair Procedures: Disassembly

1. Remove the rear cover (A) after removing nuts (B).

   Courtesy of HYUNDAI MOTOR AMERICA

2. Remove the mounting bolts (A) and the regulator assembly (B).

   Courtesy of HYUNDAI MOTOR AMERICA

3. Remove the slip ring guide (A) after pulling it.

   Courtesy of HYUNDAI MOTOR AMERICA

4. Remove the pulley (A).

   Courtesy of HYUNDAI MOTOR AMERICA

5. Unsolder the 3 stator leads (A).

   Courtesy of HYUNDAI MOTOR AMERICA

6. Remove the 4 through bolts (A).

   Courtesy of HYUNDAI MOTOR AMERICA

7. Disconnect the rotor (A) and housing (B).

Courtesy of HYUNDAI MOTOR AMERICA