FixVault
Home › Hyundai › 2019 › Elantra GT N Line, Automatic DCT Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L › Heated Oxygen Sensor (HO2S) › Repair Procedures › Removal › Bank 1/Sensor 2

Bank 1/Sensor 2

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the connector (A), and then remove the sensor (B).
G13015606Courtesy of HYUNDAI MOTOR AMERICA
G13015607Courtesy of HYUNDAI MOTOR AMERICA
About FixVault