FixVault
Home › Hyundai › 2019 › Elantra SE, Automatic Trans › Repair and Diagnosis › Body & Frame › Door Locks › Smart Key System › Smart Key Diagnostic › Repair Procedures › Inspection › Neutralization Status Check

Neutralization Status Check

  1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
  2. After IG ON, select the "Neutralization Mode".
    G12975057Courtesy of HYUNDAI MOTOR AMERICA
    G12975058Courtesy of HYUNDAI MOTOR AMERICA
    G12975059Courtesy of HYUNDAI MOTOR AMERICA
    G12975060Courtesy of HYUNDAI MOTOR AMERICA
About FixVault