[In The Case Of Installing New ECM]

Perform "TEACHING MODE PROCEDURE DESCRIPTION (STEP BY STEP) " procedure with GDS.
(Refer to "IMMOBILIZER SYSTEM DIAGNOSIS (PHEV) ")

CAUTION:

When replacing the ECM, the vehicle equipped with the smart key system (Button start) must be performed procedure below.

Insert the key (or press the start button) and turn it to the IGN ON and OFF position. Then the ECM learns the smart key information automatically.

Install in the reverse order of removal.
ECM Installation Nut:

9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb-ft)

ECM Bracket Installation Bolt/Nut:

7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb-ft)