FixVault
Home › Hyundai › 2019 › Santa Fe SE, FWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.4L › Injector › Repair Procedures › Inspection

Repair Procedures: Inspection

  1. Turn the ignition switch OFF.
  2. Disconnect the injector connector.
  3. Measure resistance between the injector terminals 1 and 2.
    G13039479Courtesy of HYUNDAI MOTOR AMERICA
  4. Check that the resistance is within the specification.

    Specification  : 1.18 - 1.31 [20°C (68°F)]

About FixVault