FixVault
Home › Hyundai › 2019 › Santa Fe SEL Plus, FWD › Repair and Diagnosis › External Pages › Different car › Section 46 (Smart Key System) › Smart Key Unit › Repair Procedures › Installation › Smart Key Unit

Smart Key Unit

WARNING: This page is about a different car, the 2020 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the smart key unit.
  2. Install the smart key unit mounting bolts and connect the connector.
  3. Install the driver side crash pad lower panel.
  4. Install the negative (-) battery terminal and check the smart key system.
About FixVault