FixVault
Home › Hyundai › 2019 › Santa Fe SEL, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.4L › ETC (Electronic Throttle Control) System › Repair Procedures › Inspection › ETC Motor

ETC Motor

  1. Turn the ignition switch OFF.
  2. Disconnect the ETC module connector.
  3. Measure resistance between the ETC module terminals 3 and 6.
    G13039420Courtesy of HYUNDAI MOTOR AMERICA
  4. Check that the resistance is within the specification.

    Specification  : 0.3 - 100 [20°C (68°F)]

About FixVault