| Main Action |
|
- Poor connection
- Open or short power/ground in signal circuit
- S1
|
| Case 1 |
Prerequisite Conditions |
- Fuel system status is same as Closed loop
- Differential of fuel factor is greater than 15%
- Internal resistance signal is same as Valid
|
| Threshold Value |
- Sensor voltage is between 2.48V and 2.51V
|
| Case 2 |
Prerequisite Conditions |
- Target lambda is less than -3% or Target lambda is greater than 3%
|
| Threshold Value |
- Sensor voltage is between 2.48V and 2.51V
|
| Case 3 |
Prerequisite Conditions |
- Reference Cell Voltage is between 0.43V and 0.47V
|
| Threshold Value |
- Sensor voltage is less than 1V or Sensor voltage is greater than 4V
|
| Diagnostic Time |
|
| MIL |
|