Repair Procedures: Removal
- Turn the ignition switch OFF and disconnect the battery negative (-) cable.
- Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "AIR CLEANER ")
- Disconnect the EWGA connector (A).
- Remove the exhaust manifold heat protector.
(Refer to Engine Mechanical System - "EXHAUST MANIFOLD ")
- Remove the shaft link assembly (B) after removing the C-ring (A).
- Remove the EWGA after removing the bolts (A).CAUTION:
- When carrying the turbo charger, do not hold the rod of the turbo charge to prevent bending the rod.