FixVault
Home › Hyundai › 2020 › Elantra GT Base › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Smart Key System › Smart Key Diagnostic › Repair Procedures › Inspection › Neutralization Status Check

Neutralization Status Check

  1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
  2. After IG ON, select the "Neutralization mode".
    G13035615Courtesy of HYUNDAI MOTOR AMERICA
    G13035616Courtesy of HYUNDAI MOTOR AMERICA
    G13035617Courtesy of HYUNDAI MOTOR AMERICA
    G13035618Courtesy of HYUNDAI MOTOR AMERICA
About FixVault