DTC Information: DTC Detecting Condition

Item		Conditions for setting DTC	Possible Cause
DTC Strategy		Check CAN communication	Open/Poor Connection in DATC's C-CAN "High" line Open/Poor Connection in DATC's C-CAN "Low" line Faulty Power Supply to DATC*
Enable Conditions		IG key "ON" Power voltage 9V~16V C-CAN bus is normal
Threshold Value		DATC*'s C-CAN message is not received
Diagnostic Time		10 sec
DTC Erasing	Active DTC	Erased DTC after solved problem
DTC Erasing	History DTC	Can be erased by GDS

NOTE: DATC* : "A/C CONTROL MODULE"
CGW* : "IGPM_GATEWAY"