FixVault
Home › Hyundai › 2020 › Elantra GT Base › Repair and Diagnosis › Electrical › Starter › Button Engine Start System › Start/Stop Button › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the Crash Pad Side Garnish (RH).

    (Refer to Body - "CRASH PAD ")

  3. Remove the start/stop button (B) after disconnecting the start/stop button connector (A).
    G13036102Courtesy of HYUNDAI MOTOR AMERICA
About FixVault