FixVault
Home › Hyundai › 2020 › Elantra GT N Line, Automatic DCT Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L › Engine Coolant Temperature Sensor (ACTS) › Repair Procedures › Inspection

Repair Procedures: Inspection

  1. Turn the ignition switch OFF.
  2. Remove the ACTS.

    (Refer to "REMOVAL ")

  3. After immersing the thermistor of the sensor into engine coolant, measure resistance between the ACTS terminals 3 and 4.
  4. Check that the resistance is within the specification.

    Specification:  Refer to "SPECIFICATIONS "

About FixVault