| DTC Strategy |
- Check RAM Area/Communication connections
|
- Contact resistance in connectors
- Faulty PCM
|
| Enable Conditions |
- Ignition "ON" or engine running
- Engine speed during engine start is higher than 32 RPM
|
| Threshold Value |
- Actual value is higher or lower than allowable range (ADC monitoring or Engine speed ratio monitor or Idle speed controller monitor or torque loss monitor or Min/Max Clutch torque monitor or Pedal value monitor or TPS ratio monitor or Mass fuel flow monitor errors)
|
| Diagnostic Time |
|
| MIL On Condition |
|