FixVault
Home › Hyundai › 2020 › Elantra Value Edition › Repair and Diagnosis › External Pages › Different car › Section 29 (Smart Key System) › Smart Key Diagnostic › Repair Procedures › Inspection › Neutralization Status Check

Neutralization Status Check

WARNING: This page is about a different car, the 2019 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the cable of GDS to the data link connector in driver side crash pad lower panel.
  2. After IG ON, select the "Neutralization Mode".
    G12975057Courtesy of HYUNDAI MOTOR AMERICA
    G12975058Courtesy of HYUNDAI MOTOR AMERICA
    G12975059Courtesy of HYUNDAI MOTOR AMERICA
    G12975060Courtesy of HYUNDAI MOTOR AMERICA
About FixVault