FixVault
Home › Hyundai › 2020 › Elantra Value Edition › Repair and Diagnosis › External Pages › Different car › Section 62 (Body Control Module Diagnosis) › DTC B163E-00: Rain Sensor Module LIN Fault › Verification of Repair › Verification of Vehicle Repair

Verification of Vehicle Repair

WARNING: This page is about a different car, the 2019 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and select "Diagnostic Trouble Codes (DTC)"  mode.
  2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
  3. Is any DTC displayed again?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • System performing to specification at this time.
About FixVault