FixVault
Home › Hyundai › 2020 › Kona Limited, 4WD › Repair and Diagnosis › Body & Frame › Ignition Switch/Steering Lock › Ignition Switch Assembly › Ignition Switch Assembly › Repair Procedures › Inspection

Repair Procedures: Inspection

  1. Disconnect the ignition switch connector (A) and key warning switch connector (B) from under the steering column.
    G12607505Courtesy of HYUNDAI MOTOR AMERICA
    G12607506Courtesy of HYUNDAI MOTOR AMERICA
  2. Check for continuity between the terminals.
  3. If continuity is not specified, replace the switch.
    G12607507Courtesy of HYUNDAI MOTOR AMERICA
About FixVault