FixVault
Home › Hyundai › 2020 › Santa Fe SE, FWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.4L › Heated Oxygen Sensor (HO2S) › Repair Procedures › Removal › Bank 1/Sensor 2

Bank 1/Sensor 2

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the connector (A), and then remove the sensor (B).
    G13039461Courtesy of HYUNDAI MOTOR AMERICA
    G13039462Courtesy of HYUNDAI MOTOR AMERICA
About FixVault