FixVault
Home › Hyundai › 2020 › Sonata Limited › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L (Except HEV) › Boost Pressure Sensor (BPS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF, and then disconnect the battery negative (-) terminal.
  2. Disconnect the boost pressure sensor (BPS) connector (A).
  3. Remove the sensor (B) after loosening the mounting bolt.
G14524900Courtesy of HYUNDAI MOTOR AMERICA
About FixVault