FixVault
Home › Hyundai › 2020 › Tucson Limited, FWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.4L › Camshaft Position Sensor (CMPS) › Repair Procedures › Removal › [Bank 1/Exhaust]

[Bank 1/Exhaust]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the engine hanger & camshaft position sensor protector after loosening the mounting bolt (B).
  4. Remove the mounting bolt (C), and then remove the sensor.
    G13035030Courtesy of HYUNDAI MOTOR AMERICA
    NOTE: When installing the sensor connector be sure to keep the wiring clip position (A).
    G13035031Courtesy of HYUNDAI MOTOR AMERICA
About FixVault