FixVault
Home › Hyundai › 2021 › Elantra N Line, Standard Trans › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6L (Except HEV) › Engine Control Module (ECM) › Repair Procedures › Adjustment › ECM neutralization procedure (With immobilizer)

ECM neutralization procedure (With immobilizer)

CAUTION:
  • When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below.

[In the case of installing used ECM] 

  1. Perform "ECM Neutral mode" procedure with diagnostic tool.

    (Refer to Body Electrical System - "IMMOBILIZER SYSTEM ")

  2. After finishing "ECM Neutral mode", perform "KEY TEACHING " procedure with diagnostic tool.

    (Refer to Body Electrical System - "IMMOBILIZER SYSTEM ")

[In the case of installing new ECM] 

About FixVault