FixVault
Home › Hyundai › 2021 › Ioniq Plug-In Hybrid SE › Repair and Diagnosis › Transmission › Transmission Control Systems › Double Clutch Transmission Control System (PHEV) › DCT Control Module (TCM) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the TCM connector (A).
    G13563307Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the TCM from the vehicle after loosen the bolts (A-4ea).
    G13563308Courtesy of HYUNDAI MOTOR AMERICA
About FixVault