Repair Procedures: Inspection

WARNING: This page is about a different car, the 2023 Hyundai Palisade. However, it is still accessible from the selected car via links, so may be relevant.

Measure the resistance of pressure sensor

Turn ignition switch OFF.
Disconnect the pressure sensor connector.
Measure resistance between sensor terminal and terminal.

Check the measured resistance.

(Refer to table)

TERMINAL AND RESISTANCE SPECIFICATION

Terminal	Resistance
PIN 2 - PIN 3	153.2 - 255.36 kΩ
PIN1 - PIN 3	50.3 - 75.6 kΩ
PIN1 - PIN 2	123.36 - 328.56 kΩ