Repair Procedures: Inspection
WARNING: This page is about a different car, the 2023 Hyundai Palisade. However, it is still accessible from the selected car via links, so may be relevant.
- Switch "OFF" the ignition.
- Disconnect the ECTS connector.
- Remove the ECTS.
(Refer to "REMOVAL ")
- After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECTS terminals 3 and 4.
- Check that the resistance is within the specification.
Temperature Resistance (kΩ) °C °F -40 -40 48.14 -20 -4 14.13-16.83 0 32 5.79 20 68 2.31 - 2.59 40 104 1.15 60 140 0.59 80 176 0.32