FixVault
Home › Hyundai › 2021 › Palisade Calligraphy, FWD › Repair and Diagnosis › External Pages › Different car › Section 7 (Engine Control System) › Fuel Pressure Control Valve (FPCV) › Repair Procedures › Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2023 Hyundai Palisade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Disconnect the fuel pressure regulator valve connector.
  3. Measure resistance between the fuel pressure regulator valve terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification  : 0.39 - 0.43Ω [20°C (68°F)]

About FixVault