Repair Procedures: Removal
WARNING: This page is about a different car, the 2023 Hyundai Palisade. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the battery (-) terminal.
- Disconnect the knock sensor connector (A).
[Knock Sensor (Bank 1)]
[Knock Sensor (Bank 2)]
- Remove the intake manifold.
(Refer to Engine Mechanical System - "INTAKE MANIFOLD ")
- Remove the mounting bolt (A), and then remove the sensor from the cylinder block.
Tightening torque:
15.7 - 23.5 N.m (1.6 - 2.4 kgf.m, 11.6 - 17.4 lb-ft)
[Knock Sensor (Bank 1)]
[Knock Sensor (Bank 2)]