DTC Information And Inspection: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Level 2 monitoring (=Process monitoring)	Poor Connector Connection Faulty ECM
Enable Condition	Ignition "ON" or engine running
Threshold Value	Actual value is higher or lower than allowable range (ADC monitoring or Engine speed ratio monitor or Idle speed controller monitor or torque loss monitor or Min/Max Clutch torque monitor or Pedal value monitor or TPS ratio monitor or Mass fuel flow monitor errors)
Diagnostic Time	0.52s
MIL ON Condition	1 driving cycle