FixVault
Home › Hyundai › 2021 › Palisade SE, FWD › Repair and Diagnosis › External Pages › Different car › Section 7 (Engine Control System) › Variable Force Solenoid (VFS) › Repair Procedures › Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2023 Hyundai Palisade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch "OFF" the ignition.
  2. Disconnect the VFS connector.
  3. Measure resistance between the VFS terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification  : 7.0 - 8.0Ω [20°C (68°F)]

About FixVault