Repair Procedures: Removal
- Perform the oil pressure characteristics backup procedure using the diagnostic tool when replacing with a new TCM.
- Turn ignition switch OFF and disconnect the negative (-) battery cable.
- Remove the air duct (A).
- Remove the air cleaner assembly.
- Disconnect the Mass Air Flow Sensor (MAFS) connector (A).
- Separate the bleeder hose (B).
- Separate the intake hose (C).
- Remove the air cleaner assembly (D).
Tightening torque:
Intake hose clamp: 2.9 - 4.9 N.m (0.3 - 0.5 kgf.m, 2.2 - 3.6 lb-ft)
Air cleaner mounting bolt: 7.8 - 9.8 N.m (0.8 - 1.0 kgf.m, 5.8 - 7.2 lb-ft)
- Disconnect the TCM connector (A).